Sunday 15 July 2012

Windows 8 - Cisco VPN Client - Failed to enable virtual adapter

So i installed Windows 8 release preview on my desktop a few days ago and so far i've been quite impressed with it.

One problem that i've come across so far is that after upgrading, Cisco vpn client stopped working with a "Failed to enable Virtual Adapter" error when i tried to connect to any vpn.












This is massively annoying for me as i use Cisco vpn client to connect to the network at work.

Fortunately after some frantic googling i managed to find a workaround.

Fire up the registry editor and navigate to the following path.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\CVirtA

Modify the DisplayName key












For 64bit Windows, edit the key so that it reads "Cisco Systems VPN Adapter for 64-bit Windows", or for x86 "Cisco Systems VPN Adapter"












Now open the vpn client and try connecting again. It should work now.

Hopefully this post will save someone else a bit of time.

11 comments:

  1. Brilliant thats a life saver, thanks

    ReplyDelete
  2. Thanks; just installed Windows 8 and needed to get the VPN client working. You rock!

    ReplyDelete
  3. Thanks for solution.
    It works good.
    top10-bestvpn.com

    ReplyDelete
  4. It works fine.Thanks a lot for this solution.
    Nice blog about VPN and etc.
    10webhostingservice

    ReplyDelete
  5. Thank you again for all the knowledge you distribute,Good post. I was very interested in the article, it's quite inspiring I should admit. I like visiting you site since I always come across interesting articles like this one.Great Job, I greatly appreciate that.Do Keep sharing! Regards, windscribe free

    ReplyDelete
  6. Nice knowledge gaining article. This post is really the best on this valuable topic. tor vs vpn

    ReplyDelete
  7. I can set up my new idea from this post. It gives in depth information. Thanks for this valuable information for all,.. avast vpn torrenting

    ReplyDelete